solidus
英
美
网络 固相线; 固相線; 斜线; 苏勒德斯; 斜线分隔符号
COCA.46938
英英释义
noun
- a punctuation mark (/) used to separate related items of information
- a gold coin of the Byzantine Empire
双语例句
- From the experimental data, the pouring temperature, liquidus and solidus temperatures of the alloy are obtained, and the solidification range of the alloy is determined as 71 ℃.
测试了合金的浇注温度，液相线温度和固相线温度，得出合金的凝固温度区间为71℃。 - Computerized prediction of liquidus and solidus curves of binary alloy systems of transition metals with continuous solid solutions
过渡金属二元连续固溶系液相线、固相线的计算机预报 - On the Solidus of Primary Metallic Solid Solutions
初级金属固溶体的固相线 - The results show that ( AgCu_ ( 28))_ ( 80) In_ ( 11) Sn_9 alloy has a low solidus temperature and melting range, a simple phase structure and a moderate spreading ratio.
结果表明：（AgCu28）80In11Sn9合金具有较低的固相线温度和熔程、简单的物相结构、适中的铺展率。 - When the crystallization temperature is blow the solidus, non-oscillatory zoning or dendritic crystal and glass mass will be formed.
当结晶温度低于团相线温度时，则形成非韵律环带或枝晶甚至玻璃体； - Calculation of pyrometric solidus composition of magnesia refractory of the system m-ma-m2s-cms
M-MA-M2S-CMS系镁质耐火材料高温固相组成的计算 - Slant ( slash): The oblique line used to separate one element from another. Also called Solidus.
斜笔（斜线）：用来分隔两种不同要素的斜线。 - The results indicate that the welding temperature is the most important factor for diffusion welding of composite. When the welding temperature range is between solidus and liquidus, the peak joint strength can reach 170 MPa.
指出焊接温度是复合材料扩散焊接最重要的工艺参数，焊接温度介于基体合金固相线与液相线之间，接头强度最高值可达到170MPa； - When hot pressed at the temperature which is higher than the solidus curve and hot extruded at the temperature which is lower than that, the strength of the composite is stronger due to the high strength of metal matrix and interfacial cohesion.
在高于基体固相点温度热压烧结而低于固相点温度热挤压时，金属基体强度高且界面结合牢固，复合材料的性能最佳。曲线流有着非常广泛的应用。 - The liquidus and solidus in the mushy zone was calculated based on back diffusion and a database for multi-component steel with the thermal-physical parameters depended on composition, temperature and solid fraction.
该模型根据糊状区溶质传输和反扩散理论，基于变热物性参数，采用钢中多组元成分的百分含量计算液、固相线温度。